Skip to content
MyHRM

Compatibility

What MyHRM pairs with

MyHRM behaves like a generic Bluetooth Low Energy heart-rate monitor. If a device pairs a Bluetooth HR sensor, it should see MyHRM.

No ANT+. MyHRM broadcasts over Bluetooth Low Energy only. Devices that can only use ANT+ heart-rate sensors will not detect it.

One device at a time. Bluetooth heart-rate sensors normally connect to a single device. Disconnect “MyHRM” from your Garmin or another app before pairing it with a Peloton, and vice versa.

Garmin Edge — confirmed

Validated by the pilot tester group across repeated field rides. Both required the same two steps first: disable the phone under Settings → Connected Features, and remove any heart-rate strap already paired on the Edge.

Device Status Notes
Garmin Edge 840 Compatible Field-validated. Pairs as a Heart Rate sensor once the phone is disabled under Connected Features and any existing HR strap is removed.
Garmin Edge 1050 Compatible Field-validated. Same procedure as the Edge 840 — disable the phone in Connected Features, remove any active HR sensor, then add “MyHRM”.

Peloton — confirmed

Validated by a pilot tester. Unlike the Garmin Edge, no special Bluetooth or phone-connection steps were needed.

Device Status Notes
Peloton Bike+ Compatible Field-validated. “MyHRM” paired directly through the Bike+’s heart-rate sensor pairing flow — no special Bluetooth or phone-connection steps required.

Garmin Edge — expected compatible

These support Bluetooth wireless sensor pairing but haven’t been individually field-validated yet. Expect the same two-step setup as the confirmed models.

Device Status Notes
Edge 1040 / 1040 Solar Expected compatible Supports Bluetooth wireless sensor pairing.
Edge 1030 Plus / 1030 Expected compatible Supports Bluetooth wireless sensor pairing.
Edge 850 Expected compatible Supports Bluetooth wireless sensor pairing.
Edge 840 Solar Expected compatible Same family as the validated Edge 840; validate with the same phone- and HRM-disabling steps.
Edge 830 / 530 Expected compatible Supports Bluetooth wireless sensor pairing.
Edge 550 Expected compatible Supports Bluetooth wireless sensor pairing.
Edge 540 / 540 Solar Expected compatible Supports Bluetooth wireless sensor pairing.
Edge Explore 2 / Edge Explore Expected compatible Supports Bluetooth wireless sensor pairing.
Edge 130 Plus / 130 Expected compatible Supports Bluetooth wireless sensor pairing.

Peloton — expected compatible

These support standard Bluetooth heart-rate sensor pairing like the Bike+, but haven’t been validated with MyHRM yet.

Device Status Notes
Peloton Bike (original) Expected compatible Supports standard Bluetooth heart-rate sensor pairing like the Bike+; not yet validated with MyHRM.
Peloton Tread / Tread+ Expected compatible Supports standard Bluetooth heart-rate sensor pairing; not yet validated with MyHRM.
Peloton Row Expected compatible Supports standard Bluetooth heart-rate sensor pairing; not yet validated with MyHRM.

Peloton — needs validation

Device Status Notes
Peloton app on iPad or Apple TV Needs validation Can connect Bluetooth heart-rate sensors, but it must run on a separate device because the MyHRM iPhone is the one advertising.

Garmin Edge — not recommended

Older generations that emphasise ANT+ or phone Bluetooth over standard BLE sensor pairing. MyHRM does not broadcast ANT+.

Device Status Notes
Edge 520 / 520 Plus Not recommended Older documentation emphasises ANT+ sensor pairing or phone Bluetooth.
Edge 820 Not recommended Older generation; verify Bluetooth sensor support before relying on MyHRM.
Edge 1000 and older Not recommended Older generation; MyHRM does not broadcast ANT+.

“Expected compatible” means the device supports Bluetooth sensor pairing but we haven't validated it directly yet. If you test MyHRM with your own gear, please send a compatibility report — it helps everyone.

Have a device to test?

Join early access and tell us how MyHRM pairs with your head unit.